AZCO Drill Bits
Hybrid Bits
Powered by Pexus™
The Best of Both Cutting Mechanisms
Our Hybrid Bits merge the aggressive shearing action of PDC cutters with the gouging mechanism of the patented Pexus™ Inserts — delivering exceptional performance in the interbedded and transition zone formations that challenge conventional bit designs.
With no moving parts and a proven combined cutting structure, AZCO Hybrid Bits reduce vibration, minimise stick-slip, and maintain directional control across a wide range of formation hardnesses.
Pexus™ Technology
How It Works
Traditional Hybrid bits employ a combination of roller cone crushing action and PDC shearing action to provide smooth response and extended life in hard transitional formation drilling. The patented Pexus™ technology introduces a hybrid solution with no moving parts. The leading gouging element pre-fractures and relieves stress ahead of the PDC cutter, thereby lowering the cutter work rate and protecting it from debris encountered during even the hardest drilling. Fine tuning of the cutting structure determines how each component engages the formation allowing greater flexibility for specific application design.
Gouging Action
The Pexus inserts engage the formation first, gouging and pre-fracturing the rock to relieve stress and reduce the load on the PDC cutters.
Shearing Action
PDC cutters follow behind the gouging elements, shearing the pre-fractured rock efficiently with a significantly reduced work rate and extended cutter life.
Tuned Engagement
Fine-tuning of the cutting structure controls how each component engages the formation, enabling precise application design for specific lithologies and transition zones.
Technology
Key Features
Combined Cutting Structure
PDC cutters and Pexus™ Inserts work in concert — shearing soft-to-medium rock while gouging through harder stringers without compromising ROP.
No Moving Parts
Unlike roller-cone and traditional Hybrid bits, the Pexus design has no bearings or seals to fail, delivering the reliability of a fixed-cutter bit in challenging formations drilling applications.
Reduced Vibration
The dual cutting mechanism dampens torsional and lateral vibration, protecting the BHA and extending bit life in interbedded sequences.
Directional Compatibility
Optimised gauge geometry and cutter placement make AZCO Hybrid Bits fully compatible with RSS and PDM assemblies for precise directional control. Pexus Hybrid bits are available with a shankless body for ultimate directional control.
Transition Zone Performance
Engineered specifically for formations that transition between soft and hard — eliminating the need for bit trips when lithology changes.
Pexus™ Insert Technology
Patented hybrid gouging inserts available in Diamond or Carbide options, with engineered tip radius matched to formation abrasivity and operator preference.
Ideal Applications
- Interbedded formations with alternating soft and hard layers
- Transition zones between geological sequences
- Directional and vertical well profiles
- Formations prone to stick-slip and torsional vibration
- Applications where PDC bits have historically tripped out early
- North Africa and Middle East carbonate and sandstone sequences
Pexus™ Insert Options
Diamond Pexus™
Optimised for abrasive formations where wear resistance is the primary concern. Delivers extended bit life in hard, abrasive sandstones and carbonates.
Carbide Pexus™
Preferred for impact-prone interbedded sequences. Tungsten carbide construction provides superior impact resistance in chert and conglomerate stringers.
Rotating Pexus™
For surface hole applications and conglomerate zones.
Discuss Your Formation Challenge
Our technical team will review your offset data and recommend the right Hybrid Bit configuration for your well programme.